モデル/Boltning - Realistic, Lightning, HYPER - v1.0

Boltning - Realistic, Lightning, HYPER - v1.0

8/29/2025

9:47:44 AM

推奨ネガティブプロンプト

grotesque, awkward, misshapen, distorted, twisted, contorted, unsightly, mangled, lopsided, malformed, asymmetrical, irregular, unnatural, botched, mutilated, repulsive, ghastly, hideous, unappealing, terrible, awful, deformed, frightful, odious, obnoxious, ugly, revolting, disfigured, hateful, repugnant, sickening, vile, detestable, abhorrent, loathsome, contemptible, execrable, poorly drawn hands, repellent, disgusting, bad anatomy, blurry, poorly drawn face, distasteful, abominable, out of frame, tiling, extra limbs, poorly drawn feet, watermark, signature, body out of frame, text, blurred, grainy, cut off, draft, amateur, multiple, gross, weird, uneven, furnishing, decorating, decoration, furniture, poor, low, basic, worst, unprofessional, failure, crayon, oil, label, thousand hands

推奨パラメータ

samplers

DDPM, Euler, DPM++ SDE

steps

10 - 20

cfg

1.5 - 2

clip skip

resolution

832x1216, 832x1216

vae

sdxl_vae.safetensors

推奨ハイレゾパラメータ

upscaler

Latent, 4x_NMKD-Siax_200k, LDSR

upscale

1.5

steps

denoising strength

0.4 - 0.5

ヒント

Using any SDXL Lora with the Hyper version results in blurry pictures.

The HYPER version is very fast and about 60% faster than a normal Boltning with same parameters.

The HYPER version uses only the Euler a sampler - do not use other samplers.

The recommended CFG for HYPER is 1 and recommended steps is 10.

Resolution 832x1216 is great but other resolutions also work well.

バージョンのハイライト

- The final version!

- Lots of small fixes and additions.

Using any SDXL Lora with the Hyper version of the model results blurry pictures.

The result of experimenting with Lightning models.

What was born as an experiment became a major project. I continue to work on this model and improve it as much as possible. Even though I didn't believe it would turn out to be anything worthwhile, I was wrong. The model has proven to be very good, especially when it comes to generating highly detailed and pleasing to the eye images. I hope you enjoy what I'm doing.

Our slogan: - You don't have ten fingers on your hand, and Midjourney is quietly crying on the side and jealous.

Version 1.0 - Final. I have done a lot of tests and slightly changed the recommended parameters.

Recommended parameters:

Sampler: DDPM, Euler, DPM++ SDE

CFG: 1.5 - 2

Steps: 10

Resolution: 832x1216 is great but you can use any other, does a great job.

A little bit about the HYPER version:

- This is a very fast model. Despite the fact that it weighs twice as much as a normal Boltning, it is much faster. In my tests with the same parameters it is 60% faster.

- This version is very realistic and detailed despite the fact that it uses the “Euler a” sampler.

- It follows prompt better and handles anatomy better.

- There are no plans for a 16 bit version. Sorry.